-
Symptom Login Driver will not start. "Cannot start Login Driver" reported in Lenel Error Log. The Windows event log reports a failure on WS2_32.dll because the .dll was unloaded incorrectly: Faulting module name: WS2_32.dll_unloaded, version:...
-
Question Where are the logs located on a LenelS2 NVR (LNVR)? Answer For all Windows versions, LNVR logs are located in C:\ProgramData\Lenel\LNVSuite\ \Logs , where is the LNVR version. For example, C:\ProgramData\Lenel\LNVSuite\7.8\Log...
-
How to configure a 75-bit PIV card format Procedure Steps First, set the maximum badge number length to 14 by doing the following: 1) Start System Administration. 2) From the Administration menu, select System Options . ...
-
How to configure ODBC DSNs in 32-bit and 64-bit versions of Microsoft Windows
Procedure Steps
If you experience problems connecting to the OnGuard database, check the ODBC connection to be sure it is configured correctly. For a sys...
-
How to address devices connected to the LNL-8000 Procedure Steps Configuration of the device address is done in System Administration. 1) Configure the port for the device. This is the port number on the ISC that the LNL-8000 is connected ...
-
How to change the "Log On as" property for a Windows service from the local account to a specific user Procedure Steps 1) Run Services.msc
2) Double-click on the service you wish to change.
3) Click the Log On tab and then select This...
-
How to run an Scp Debug file for short-term logging Procedure Steps 1) If the Communication Server service is installed on a computer running Windows 7 or above, User Account Control (UAC) must be disabled. Open Control Panel and select User...
-
Last Updated: 06/05/2025
in OnGuard Ecosystem Database SQL
How to schedule a backup for SQL Server 2005 Express Procedure Steps To back up an SQL Server database on a time schedule for an SQL Server 2017 Express system: 1) Create a folder named SQLBackup in the C:\ drive. 2) Copy th...
-
Question What ports are used by Prism and LNVR, and what are the Microsoft requirements? Answer Prism and LNVR require the following ports: 135 client workstation/server communications port DCOM will use any random ...
-
Symptom When attempting to use a licensable feature in OnGuard, the following error may appear in System Administration. "The following feature is currently unavailable -- the maximum number of concurrent users for this feature has been reach...
Your Privacy Choices