Linkage issue when using Advisor Advanced DGP output

Symptom

 Linkage issue when using Advisor Advance DGP outputWhen usingDGP output, the activation status to build a global I/O that changes the reader mode (for example, to Unlocked) provides good output, but the linkage is not executed. The same action with an output located on the Advisor Advanced Board functions correctly.  

Resolution

 None. This is not a supported configuration. This functionality is not supported by either Advisor Advanced or from OnGuard. 

Applies To

 OnGuard 7.6 and later 

Additional Information


Copyright © 2024 Carrier. All rights reserved.