Symptom
In System Administration, if you modify a zone name and select [OK] the name reverts back to the default name of "Zone: 1".
1) Navigate to Administration > Users. On the System Permission Groups tab, select the Intrusion sub-tab and click [Modify].
2) Make sure that the Intrusion zones and the Modify check box are both enabled. Note that you may need to be logged into OnGuard with the System Administrator account to change these settings.
3) Navigate to Additional Hardware > Intrusion Detection Devices and select the Zones sub-tab. When modifying the zone name make sure that Enabled setting is set to "Yes". If it is set to "No", double-click the field value to set it to "Yes". Changes to the zone name should now properly save.
Resolution
To resolve the issue you must have the proper permissions. To do this:1) Navigate to Administration > Users. On the System Permission Groups tab, select the Intrusion sub-tab and click [Modify].
2) Make sure that the Intrusion zones and the Modify check box are both enabled. Note that you may need to be logged into OnGuard with the System Administrator account to change these settings.
3) Navigate to Additional Hardware > Intrusion Detection Devices and select the Zones sub-tab. When modifying the zone name make sure that Enabled setting is set to "Yes". If it is set to "No", double-click the field value to set it to "Yes". Changes to the zone name should now properly save.
