How to configure elevator control using an LNL-1320
Procedure Steps
1) In System Administration, on the appropriate Access Panels tab, select the check box for Elevator Control to enable this feature.2) On the Readers tab, select the reader you wish to modify.
3) Select the check box for Elevator. This causes the LNL-1320 to behave as an elevator reader board.
- All six outputs will be used as elevator outputs
- None of the inputs may be used
- Only one reader is able to be configured for the board
- Floor tracking is not available
4) Configure the elevator control levels for access levels as a normal elevator configuration.
