System Administration

How to create a man-trap using Local I/O and relay outputs Procedure Steps A man-trap configuration has a controlled area between an outside door and an inside door. Two readers control the outside door, and two readers control the inside doo...

How to set up digital video verification Procedure Steps Users can use digital video verification for any camera with a Device-Camera link to a reader. Note: The LS Linkage Server must be configured and the service must be running for v...

 Question What is use limit and how is it utilized? Answer To utilize this feature for a particular reader, in System Administration, select the Enforce Use Limit check box on the Readers-Settings tab. A cardholder's use limit is...

How to assign access levels in a segmented system from multiple segments Procedure Steps In order for users from one segment to assign access levels from another segment, an option in the Segments folder must be enabled. In System Administrat...

How to enable macros and command strings on the LNL-CK and OSDP LCD devices Procedure Steps To utilize the display string and designate the macros for command keypads: 1) Make sure the controller (to which the LNL-CK is ...

Symptom The 3rd Party OPC Server appears offline in Alarm Monitoring due to improper DCOM permissions Resolution Note: This resolution assumes that the 3rd party OPC server is set up properly in System Administration and s...

Symptom When printing a badge you may receive the following error: Note:   For this example, the printer is a NISCA PR5350-USB.  Your error will be similar to this one. Resolution The encoder information is missing from the...

How to configure a direct card printer for inline encoding Procedure Steps 1) Before attempting to install the printer, refer to the Badge Printers Compatibility Chart ( https://partner.lenel.com  ) and the Inline Encoding ap...

How to configure elevator control using an LNL-1320 Procedure Steps 1) In System Administration, on the appropriate Access Panels tab, select the check box for Elevator Control to enable this feature. 2)  On the Readers tab, select the...

How to determine the card format of a Wiegand card using Scp Debug Procedure Steps Prerequisites: 1) Ensure the correct card reader is online for the type of card you are evaluating (for example, an HID Prox reader for an HID card). 2) ...