How to create Extended_ID card formats to support PIV/CAC or PIV-I
Procedure Steps
For a 200 Bit PIV or CAC Card:
- Navigate to System Administration > Administration > Card Formats and click [Add] to create a new card format.
- Select Wiegand as the card format Type.
- Provide a Name such as “Extended_ID 200 Bit”.
- Set Facility Code to 0.
- Set Badge Offset Number to 0.
- Set Total Number of Bits On Card to 200.
- Leave all check boxes deselected (Asset Format, Reversed Bit Order, Duress Format).
- For the following Starting Bit and Number of Bits select:
- Facility Code: 0 | 0
- Card Number: 0 | 0
- Extended ID: 0 | 200
- Issue Code: 0 | 0
- ADA: 0 | 0
- Activate Date: 0 | 0
- Deactivate Date: 0 | 0
- Authorization: 0 | 0
- Number of Even Parity Bits: 0
- Number of Odd Parity Bits: 0
- Special: None
- Click [OK] to save the record.
For a 128 Bit PIV-I Card:
- Navigate to System Administration > Administration > Card Formats and click [Add] to create a new card format.
- Select Wiegand as the card format Type.
- Provide a Name such as “Extended ID 128 Bit”.
- Set Facility Code to 0.
- Set Badge Offset Number to 0.
- Set Total Number of Bits On Card to 128.
- Leave all check boxes blank (Asset Format, Reversed Bit Order, Duress Format).
- For the following Starting Bit and Number of Bits select:
- Facility Code: 0 | 0
- Card Number: 0 | 0
- Extended ID: 0 | 128
- Issue Code: 0 | 0
- ADA: 0 | 0
- Activate Date: 0 | 0
- Deactivate Date: 0 | 0
- Authorization: 0 | 0
- Number of Even Parity Bits: 0
- Number of Odd Parity Bits: 0
- Special: None
- Click [OK] to save the record.
Applies To
OnGuard 7.2 and later
Additional Information
Extended ID values are not supported on legacy ISCs (LNL-2000, LNL-1000, or LNL-500).
Copyright © 2024 Carrier. All rights reserved.
