Symptom
Delays may occur when using Global Anti-Passback on an LNL- 500, -1000, or -2000 panel with a Lantronix device.
Resolution
Use the following ACS.INI setting to adjust the poll delay setting that is likely causing the delays in the Global APB processing.
Make this change under the [Service] section of the ACS.INI file.
Note: This value is in milliseconds. The value of 200 is not fixed value and can be adjusted. The current default value is 1500.
Make this change under the [Service] section of the ACS.INI file.
ScpLanPollDelay=200
Note: This value is in milliseconds. The value of 200 is not fixed value and can be adjusted. The current default value is 1500.
Applies To
OnGuard (All versions)