Question
What is the difference between series 3, series 2, and series 1 hardware boards?
Examples of these boards include the LNL-1100 and LNL-1200 alarm panels, and LNL-1300 and LNL-1320 reader interface modules.
Answer
Some of the differences are listed below. For a complete list, refer to the appropriate Overview section in the Hardware Installation Guide.
- Serial numbers
| Access Panels | Starting Serial Number | Ending Serial Number | |
| SCP Series | LNL-500 | 1005 | 544731 |
| LNL-1000 | 110 | 526046 | |
| LNL-2000 | 129 | 528250 | |
| EP Series | LNL-2210 | 28 | 1063877 |
| LNL-2220 | 103 | 1081558 | |
| LNL-3300 | 119 | 1025579 | |
| LNL-4420 | 502590 | 1005822 | |
| LP Series | LNL-X2210 | 116 | 1003698 |
| LNL-X2220 | 129 | 1005744 | |
| LNL-X3300 | 126 | 1001046 | |
| LNL-X4420 | 123 | 1000259 |
| Downstream Devices | Starting Serial Number | Ending Serial Number | |
| Series 1 | LNL-1300 | 2550 | 145282 |
| LNL-1320 | 102 | 190243 | |
| LNL-1100 | 158 | 21412 | |
| LNL-1200 | 174 | 14004 | |
| Series 2 | LNL-1300 | 150029 | 1039594 |
| LNL-1320 | 200026 | 1849609 | |
| LNL-1100 | 40013 | 1020766 | |
| LNL-1200 | 20013 | 1011129 | |
| Series 3 | LNL-1300-S3 | 2000003 | |
| LNL-1320-S3 | 3000006 | ||
| LNL-1100-S3 | 2000003 | ||
| LNL-1200-S3 | 2000003 |
- Color
Series 3 boards are red.
Series 2 and series 1 boards are green. - LEDs
Series 3 and 2 boards have LEDs mounted flush to the board. These LEDs are much brighter than the LEDs on series 1 boards.
Series 1 boards have LEDs shaped like small bulbs. The LEDs are dim and sometimes they are difficult to see when lit. - Address settings
The LNL-1300 Series 3 has a switch block to set addresses.
Series 2 and series 1 boards set addresses with jumpers. - Firmware revisions change for series versions of the same board model. This particularly applies to LNL-1300 and LNL-1320 reader interface modules. Consult the "Lenel Access Control Hardware" compatibility chart on the Partner Center, located at the following address, to determine correct versions of firmware:
Applies To
All OnGuard versions
