Other - End Of Life

Problem Overview Double Video with Time-lapse Limitation (OG-15507) Detailed Description When using the Double Video on Alarm feature, the time lapse setting must have the same value as the AlarmDurationMax value, otherwise there may be blac...

 Problem Overview Double Video on Alarm May Not Be Displayed in Pairs Detailed Description The default behavior with this feature is to launch recorded and live video in matrix mode. Additional configuration may be necessary if multiple ca...

Problem Overview Panasonic Camera Model Numbers in the Device Discovery Console (OG-17442) Detailed Description Some Panasonic cameras are displayed by their series number rather than their model number in the Device Discovery Console. These...

Problem Overview IntelligentVideo Database Upgrade Utility Detailed Description The IntelligentVideo Database Upgrade Utility is used to update IntelligentVideo event configurations to OnGuard 2010. This utility is found in the Digital Vide...

Problem Overview Audio Supported Only on Channel 1 with AXIS 7404 Video Encoder (OG-18932) Detailed Description Audio is currently only supported for channel 1 on AXIS 7404 video encoders. Currently it is possible to configure audio for othe...

Problem Overview AXIS 233D Camera Does Not Support PAL Resolutions (OG-18376) Detailed Description The AXIS 233D camera is not supported with PAL resolutions. Applies To OnGuard 2010 (6.4.500) Additional Information None ...

Problem Overview Reduced Rate Recording Not Supported with H.264 Cameras Detailed Description Reduced rate recording (including time-lapse) is not supported with H.264 cameras. The LNVR can only record at the rate of live recording, not less...

Problem Overview Remote Monitor and Alarm Monitoring May Become De-synchronized (OG-19830) Detailed Description Remote Monitor and Alarm Monitoring may become de-synchronized after Alarm Monitoring is restarted. For example, Video Quality En...

Symptom The Object Moves Too Fast event has a Maximum Crossing Time property (for OnGuard version earlier than 6.1.222, this property was named Minimal Duration ). For upgrades to OnGuard 2008 Plus (6.1.222): If the property was previousl...

 Symptom High CPU utilization of the LnrCapSvc.exe process on an LNVR with Axis MPEG4 cameras connected. Resolution The cause of the issue may be that one or more Axis MPEG4 cameras are recording in low light conditions. For each Axis M...