How to configure the LNL-2220 or LNL-3300 for direct connect

Configure the control panels as direct connect using the Configuration Web Page.

Note: In order to connect to the web interface for the controllers, refer to the Hardware Installation Guide for network connection (DHCP, static IP, or the temporary IP address of 192.168.0.251).

1. Use a browser to go to the web page and log in.

2. Select HostPort.

3. For connection type, select Serial-RS232.

4. For the baud, select 38400.

5. The following is the direct connect RS-232 pin-out for 9-pin and 25-pin connectors.