How do I configure a card format for HID 37-bit proximity cards (format S10401), previously used in an AMAG system?

Question

How do I configure a card format for HID 37-bit proximity cards (format S10401), previously used in an AMAG system?

Answer

  1. In System Administration, from the Administration menu, select Card Formats....
  2. Click [Add] and select Wiegand as the card format type.
  3. Enter a name and facility code for the new card format. If there is no facility code, enter 0.
  4. Enter the following additional information:

    • Total Number of Bits On Card: 37
    • Facility Code Starting Bit: 1 (if there is no facility code, enter 0)
    • Facility Code Number of Bits: 8 (if there is no facility code, enter 0)
    • Card Number Starting Bit: 9
    • Card Number Number of Bits: 27
    • Issue Code Starting Bit: 0
    • Issue Code Number of Bits: 0
    • Number of Even Parity Bits: 0
    • Number of Odd Parity Bits: 0
    • Special: None
  1. Click [OK] to save the new card format.
  2. Assign the new card format to the desired readers from the Readers form in System Administration.

Applies To

OnGuard (All versions)

Additional Information

None