BlueDiamond Reader LED behaviors when used with WIU



Question

 
 
What are the expected behaviors of the LEDs on BlueDiamond and BlueDiamond T readers when used with a Wiegand Interface Unit (WIU)?
 
 

Answer


 
Refer to the below chart for LED behaviors depending on the readers mode and state.
 
 

LNL-3300-M5

No

Description

LNL-1380-8RP

LNL-1320-2RP

LNL-1320-S2RP

LNL-1320-S3

 

Mode/State

SF2F

WIU-4 to Wiegand†

SF2F

SF2F

SF2F

1

Card and Pin – Normal State

Solid Blue

Solid Blue

Solid Blue

Solid Blue

Solid Blue

2

Card only – Normal State

Solid Blue

Solid Blue

Solid Blue

Solid Blue

Solid Blue

3

Pin or Card – Normal State

Solid Blue

Solid Blue

Solid Blue

Solid Blue

Solid Blue

4

Facility Code Only – Normal State

Solid Blue

Solid Blue

Solid Blue

Solid Blue

Solid Blue

5

Locked

Solid Blue

Solid Blue

Solid Blue

Solid Blue

Solid Blue

6

Unlocked

Solid Green

Solid Green

Solid Green

Solid Green

Solid Green

7

Access Granted

Yellow Flash to Solid Green

Solid Green

Yellow Flash to Solid Green

Yellow Flash to Solid Green

Yellow Flash to Solid Green

8

Access Denied

Solid Yellow for 1 sec

Green and Blue – Alternating for 3 sec

Solid Yellow for 1 sec

Solid Yellow for 1 sec

Solid Yellow for 1 sec

9

waiting for PIN◊

² Solid Yellow for 1 sec

²Green and Blue – Alternating for 3 sec

³ Solid Yellow for 3 sec

³ Solid Yellow for 3 sec

³ Solid Yellow for 3 sec

 

² BD reader and T reader have same behavior
³ BD readers only
◊ Mercury Need to change firmware for LNL-1380-8RP, LNL-1320-2RP, LNL-1320-S2RP and LNL-1320-S3
†Wiegand        T525SW,
BD reader-F/2F enabled (Dev36),
BD reader-not F/2F enabled
 
 
 

Applies To

 
 
M Series Hardware
 
 

Additional Information

  • OnGuard: Version 7.4.457.69
  • LNL-3300-M5: Firmware 1.256
  • LNL-1380-8RP: Firmware 1.57.14
  • LNL-1320-2RP: Firmware 1.57.15
  • LNL-1320-S2RP: Firmware 1.57.15
  • LNL-1320-S3: Firmware 3.20.4